Attention
Les raccords de conduits ou presse-étoupe doivent être installés par du
personnel qualifié conformément aux normes électriques applicables et au couple
spécifié par le fabricant.
Electromagnetic Compatibility Notices
Refer to the following notices for cables, accessories, and prevention measures necessary to
ensure the specified EMC performance.
Notice
For EMC declarations and certifications, and additional information, refer
to the
Product Certifications and Declarations
Notice
The length of the signal cable must be no longer than 30 m (100 ft).
Notice
Operate this product only with shielded cables and accessories.
Notice
The performance of this product can be disrupted if subjected to
Electrostatic Discharge (ESD) during operation. To prevent damage, industry-
standard ESD prevention measures must be employed during installation,
maintenance, and operation.
MON-10467 User Guide
|
© National Instruments
|
7