6.
Release the reset button.
7.
Clean the gasket and gasket mating surface with a dry or damp cloth.
8.
Close the door slowly.
9.
Tighten the four captive screws on the door of the device to 1.3 N · m (11.5 lb · in.).
Where to Go Next
After you have finished mounting and connecting your MON-10467 wireless vibration
measurement device, finish setting up your system by doing the following.
•
Install your MON-10496 wireless monitoring gateway. Refer to the following
documentation on
for help with your MON-10496 device.
–
MON-10496 Safety, Environmental, and Regulatory Information
–
MON-10496 User Guide
–
MON-10496 Specifications
•
Set up and configure your system in InsightCM. Go to
and install InsightCM version 3.4 or later. For help using your device in InsightCM, refer
to the InsightCM Help in software or online at
.
Product Certifications and Declarations
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance
information. To obtain product certifications and the DoC for NI products, visit
, search by model number, and click the appropriate link.
Worldwide Support and Services
The NI website is your complete resource for technical support. At
, you have
access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.
Visit
for information about the services NI offers.
Visit
to register your NI product. Product registration facilitates technical
support and ensures that you receive important information updates from NI.
NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas,
78759-3504. NI also has offices located around the world. For support in the United States,
create your service request at
or dial 1 866 ASK MYNI (275 6964). For
support outside the United States, visit the
Worldwide Offices
section of
access the branch office websites, which provide up-to-date contact information.
32
|
ni.com
|
MON-10467 User Guide