LFH200 Cable Installation Instructions
24
ni.com
SH200LFH-BARE WIRE Cable
The SH200LFH-BARE WIRE cable is recommended for connecting the switch module to your
system if termination other than 50-pin female D-SUB is required. One end of the cable
terminates with an LFH200 connector. The other end of the cable has eight bundles of
unterminated, tinned, and stripped wires.
The following tables list the pin assignments for the SH200LFH-BARE WIRE cable.
Note
The first color listed in the Bare Wire Color column of Tables 9 through 16 is
the primary color of the wire. The second color listed is the stripe color.
Note
Each of the eight bundles consists of 13 twisted pairs of wires. Only 25 of the
wires are used. Therefore, the 26th blue/red wire remains unused and unmentioned in
Tables 9 through 16.
