Chapter 2
Configuration and Startup Procedures
2-8
ni.com
External Input Termination
Switches S12 and S16 enable a 50-ohm termination to ground for the
external trigger and external clock inputs, respectively. The GPIB-VXI/C
is factory-configured with the termination disabled for both the external
trigger and the external clock inputs. Figure 2-3 shows the settings required
to enable or disable the termination on the external trigger. Figure 2-4
shows the settings required to enable or disable the termination on the
external clock.
Figure 2-3.
External Trigger Input Termination
Figure 2-4.
External Clock Input Termination
S12
S12
a. External Trigger Input Unterminated
(Factory Configuration)
b. External Trigger Input Terminated
S16
S16
a. External Clock Input Unterminated
(Factory Configuration)
b. External Clock Input Terminated
