background image

liability of National Instruments will apply regardless of the form of action,
whether in contract or tort, including negligence.  Any action against
National Instruments must be brought within one year after the cause of
action accrues.  National Instruments shall not be liable for any delay in
performance due to causes beyond its reasonable control.  The warranty
provided herein does not cover damages, defects, malfunctions, or service
failures caused by owner's failure to follow the National Instruments
installation, operation, or maintenance instructions; owner's modification of
the product; owner's abuse, misuse, or negligent acts; and power failure or
surges, fire, flood, accident, actions of third parties, or other events outside
reasonable control.

Copyright

Under the copyright laws, this publication may not be reproduced or
transmitted in any form, electronic or mechanical, including photocopying,
recording, storing in an information retrieval system, or translating, in
whole or in part, without the prior written consent of National Instruments
Corporation.

Trademarks

NI-488M

 is a trademark of National Instruments Corporation.

Product and company names listed are trademarks or trade names of their
respective companies.

Содержание GPIB-1014 Series































Отзывы: