Drivven, Inc.
Throttle Driver Module Kit
© Drivven, Inc. 2009
• Throttle Driver Module Kit User’s Manual • D000017 • Rev B
9
user may programmatically use the analog values for throttle control feedback. Other analog
inputs from another module may also be used to provide throttle position. Most electronic throttle
bodies have redundant position signals. When using only one electronic throttle, both position
signals may be connected to the module and redundant throttle position is available. However,
when two electronic throttle bodies are used, only one position signal from each throttle may be
connected to the module, and redundant throttle position is not available. However, the additional
position signals may be connected to other analog inputs from other modules, making redundant
throttle position available for both throttles. A redundant position algorithm must be provided by
the user.
Figure 2 and figure 3 below show the typical connections for controlling single or dual throttles,
respectively. Table 1 below shows the module terminal connections to a standard Bosch DV-E5
electronic throttle body.
Figure 2. Module terminal connections to a single electronic throttle body.
