Drivven, Inc.
Throttle Driver Module Kit
© Drivven, Inc. 2009
• Throttle Driver Module Kit User’s Manual • D000017 • Rev B
15
location. Finally, specify an appropriate name for the module, which will later appear in
the FPGA I/O nodes in the FPGA block diagram. Having meaningful module names is
important for preventing coding mistakes.
13.) After adding a module to the project, a folder will automatically be added to the project
having the same module name given in the module configuration dialog. The folder will
contain the FPGA I/O pins for the module slot. These I/O pins can be selected in the
block diagram when connecting the module VI PinInput and PinOutput clusters to FPGA
I/O nodes. The example application, discussed below, should be consulted for further
details about connecting the PinInput and PinOutput clusters to FPGA I/O nodes. Within
the example projects, notice the FPGA I/O node elements having module name prefixes.
14.) Some Drivven modules can be automatically recognized by LabVIEW when adding cRIO
modules to the project. However, Drivven does not recommend using this feature
because the module names, which are automatically assigned, are not meaningful
(Mod1, Mod2, etc) and can lead to coding mistakes when wiring the Drivven FPGA VIs to
the I/O nodes. Adding the modules to the project manually, as described above, is still
the recommended method.
