National Instruments cRIO-FRC, Руководство пользователя

Страница: 8 / 14

Installing the I/O and Ethernet Gaskets
Before reassembling the cRIO-FRC, you can install two gaskets to help prevent future contamination.
NOTE
The gaskets reduce the risk of contamination but do not completely eliminate it. You should still keep
the cRIO-FRC away from conductive debris such as metal shavings and grinding debris.
CAUTION
The gaskets are made of a thin, flexible material that can tear if they are repositioned after application.
Make sure each gasket is properly aligned before applying pressure to set the adhesive.
1. Place the chassis face down on the ESD mat.
2. Remove one of the gaskets from the packaging and peel away the paper backing to reveal the
adhesive. Take care to minimize adhesive contact with foreign objects such as fingers or dust.
3. Lightly place the gasket in the chassis adhesive side down making sure it is aligned correctly
according to the following diagram.