Advanced Setup Menu
The Advanced setup menu contains BIOS settings that do not require modification for normal
operation of the cRIO-9033. If you have specific problems, such as unbootable disks or
resource conflicts, you may need to examine the settings in this menu.
Caution
Changing settings in the Advanced setup menu may result in an unstable
or unbootable controller. If this happens, restore BIOS settings to the factory
defaults.
The Advanced setup menu includes the following submenus:
•
Power/Wake Configuration Submenu
•
SATA Configuration Submenu
•
USB Configuration Submenu
Power/Wake Configuration Submenu
The Power/Wake configuration submenu contains the power and wake settings for the chipset
and cRIO-9033. The factory default settings provide the most compatible and optimal
configuration.
•
Restore After Power Loss—This setting specifies the power state that the cRIO-9033
should return to after DC power is lost. Valid values are
Stay Off
and
Turn On
. The
default value is
Turn On
. When set to
Stay Off
, the cRIO-9033 returns to the soft off
power state after AC power is restored. When set to
Turn On
, the cRIO-9033 powers on
when DC power is restored.
•
Power Button Off Behavior—This setting specifies how the system responds to the power
button. Valid options are
Normal
and
Disabled
. The default value is
Normal
. If the value
is
Normal
, the system responds to the power button as defined by the OS. If the value is
Disabled
, pressing the power button has no effect when the system is on. When the
system is in the soft off state, pushing the power button always powers on the system.
•
Ring Indicator Wake—This setting enables or disables the ability to wake a powered-off
system using the Ring Indicator pin of the RS-232 serial port. The default value is
Disabled
.
SATA Configuration Submenu
The SATA configuration submenu contains the hard disk drive (HDD) interfaces settings. The
factory default settings provide the most compatible and optimal configuration.
•
SATA Controller(s)—This setting specifies whether the onboard SATA controller is
enabled or disabled. The default value is
Enabled
.
•
Onboard Storage—This item displays the onboard drive detected in the system.
36
|
ni.com
|
NI cRIO-9033 User Manual
