Getting Started with the NI 783xR
14
ni.com
Cabling Options
Accessing the signals on the I/O connectors requires at least one cable and
one signal accessory. Table 1 summarizes the National Instruments cables
available for use with the NI 783
x
R device.
Related Documentation
Refer to the following documentation for information about the
LabVIEW FPGA Module, R Series hardware, and VIs necessary
for your application.
•
LabVIEW FPGA Module Release Notes—
describes the software
installation and other known software issues.
•
LabVIEW FPGA Module User Manual
— describes the LabVIEW
FPGA Module software and techniques for building applications in
LabVIEW with the LabVIEW FPGA Module.
•
NI 783xR User Manual
— describes the electrical and mechanical
aspects of the NI 783
x
R and contains information about its operation
and programming.
Table 1.
Cabling Options
Cable
Connector
Description
SH68-C68-S
MIO/DIO
For connecting signals from the MIO or DIO
connector to the NI SCB-68 terminal block.
SHC68-68-RMIO
MIO
For connecting signals from the MIO connector to
the SCB-68 terminal block.
Improves signal integrity and noise immunity.
Provides shielding on all AI channels and an overall
analog shield to reduce digital-to-analog crosstalk.
NSC68-262650
MIO
For direct connection of the NI 783
x
R to 5B and
SSR analog and digital signal conditioning
backplanes.
Routes signals to connectors that attach directly
to 5B backplanes (for analog signals) and SSR
backplanes (for digital signals).
NSC68-5050
DIO
For direct connection of the NI 783
x
R and
SSR backplanes.
Routes signals to connectors that attach directly to
SSR backplanes.
