BATTERY INSTALLATION AND CHARGING
TROUBLESHOOTING
Problem
Reason
Solution
The quadcopter lights are flashing
but it is not responsive to the
remote control.
1. The sync between the remote and
the drone is not complete.
1. Try re-syncing the remote to the
drone. You may need to move closer
to properly sync.
2. The battery power is low in either
the drone or the remote.
2. Charge or replace batteries if
required.
The blades on the quadcopter turn
but the drone cannot take off.
1. Insufficient battery power.
1. Charge or replace the battery.
2. Blades could be damaged.
2. Inspect and replace damaged
blades.
The quadcopter shakes badly in
flight.
Blades could be damaged or
distorted.
Inspect and replace damaged
blades.
The trim buttons are not enough to
keep the quadcopter steady.
1. Blades could be damaged or
distorted.
1. Inspect and replace damaged
blades.
2. The environment might be too
windy to safely fly the drone.
2. Do not fly the drone until safe
conditions are present.
3. Battery not centered inside drone. 3. Center the battery inside the slot.
The drone is not responding
quickly to remote control.
1. Windy conditions may be present.
1. Do not fly the drone until safe
conditions are present.
2. Remote control might be too far
from the drone.
2. Move closer to the drone, or fly
the drone closer to the pilot, in
order to increase speed on remote
control.
Battery is not charging.
The power button for the drone is in
the ON position.
Push power button on the drone
once to turn it into the OFF position.
Power button won’t turn off / is
stuck.
The power button is pressed against
the safety.
Push the bottom half of the power
button to get it unstuck or try
rotating the button slightly.
