Components and Assembly
8
CHARGER INSTRUCTIONS
See Ride-On Safety Guidelines for charger safety and instructions.
Before making AC connections, refer to the requirements on the charger ID label.
This battery charger must be grounded to reduce the risk of electric shock. Chargers are
equipped with a grounding type plug.
If an extension cord must be used, ensure it is in good condition. Use the one provided
with the machine. The use of an improper extension cord could result in a risk of a fire
or electric shock. Locate all cords so that they will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
MACHINE CHARGING
This machine has an onboard charger under the hood (Figure 1).
1. Connect to power source using the properly sized extension cord.
Note:
Not using
the proper extension cord could cause improper charging and/or charger damage.
Only use extension cord provided with machine.
2. Complete charging sequence. Refer to Charger manual for more details.
3. Disconnect cord from the power source. Ensure cord and plug are completely se-
cured to the machine.
Note:
Cord can fall under machine which could damage cord
and/or plug.
4. Release red emergency stop button.
WARNING:
DISCONNECT FROM POWER SOURCE BEFORE OPERATING.
FAILURE TO DO SO WILL RESULT IN MACHINE NOT OPERATING.
CAUTION:
THE CHARGER IS
NOT
WATER PROOF, IT IS WATER RESISTANT.
IT CANNOT WITHSTAND IMMERSION, CONTINUOUS EXPOSURE (SUCH AS
PRESSURE WASHERS OR HOSES), OR HEAVY RAIN.
WARNING:
ELECTRICAL SHOCK HAZARD. ONLY USE NATIONAL’S AP-
PROVED CHARGING SYSTEM.
FIG. 1
CAUTION:
WHEN ALARM SOUNDS, IMMEDIATELY MOVE MACHINE TO
OUTLET FOR CHARGING.
WARNING:
ALWAYS FIND A SAFE PLACE FOR RECHARGING POWER PACKS
WITH GOOD VENTILATION AWAY FROM SPARKS OR FLAME SOURCES AND
AWAY FROM BYSTANDERS. ROPE OFF IF NECESSARY.
To
order
go
to
Discount-Equipment.com
