National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / [email protected]
©2018 National Cycle, Inc.
Page 1 of 2
10-118614-000 03/18
Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this wind-
screen for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
Note:
Tips for facilitation of operation, control and
adjustment, as well as maintenance work.
Attention:
Special notes and cautionary measures which can
prevent damage to the accessory or motorcycle.
Item
Description
Part No.
Qty.
(1)
VStream® Windscreen
1
Bag#1291
(2)
Spacer, Black
44-443545-000
4
CONTENTS OF KIT
Quantum®
Hardcoated Polycarbonate
VStream® Windscreen
for Kawasaki®
Versys-X 300
N20124
Low Dark Tint
N20125
Mid Light Tint
N20126
Tall Clear
TOOLS REQUIRED
5mm Allen Wrench
Figure 1
Figure 2
PREPARATION
1.
Position motorcycle securely on its center stand.
Remove the OEM windscreen, four screws, and four
bushings. Hardware will be re-used.
(5mm Allen
Wrench) Figure 1
INSTALLATION
1.
Install OEM bushing around the windshield mount
hole on motorcycle.
Figure 2
2.
Install the VStream Windshield using the OEM
Screw and the Black Spacer (2) from Bag#1291.
Tighten the 4 Screws firmly.
(5mm Allen Wrench)
Figure 3
Figure 3
(1)
(2) x 4
(2)
(2)
