National Auto Tools NTB-800, Руководство пользователя

Страница: 11 / 20

11
The screen will then change to parameter B which you must use the caliper to measure
and enter the correct size. Use the
UP or DOWN keys to change the number. When
you are finished entering each of the 3 parameters, simply push the STOP button to
return to the balancing screen or if you already have your mode selected, you may close
the hood and spin the wheel to begin balancing process.
If you wish to enter the parameters manually, please use the following rules:
You use the
WHEEL PARAMETERS INPUT AND SHIFT KEY to navigate to each
parameter screen. You will use the UP or DOWN key to change the measurement for
each parameter. When you are finished entering each of the 3 parameters, simply push
the
STOP button to return to the balancing screen or if you already have your mode
selected, you may close the hood and spin the wheel to begin balancing process.
The first parameter will look like this:
This parameter measures the distance of the wheel from the balancer. This is the A
parameter. Use the built in ruler and extend it to the edge of the rim. You then multiply
the measurement by 10 and enter than number for this parameter using the
UP or DOWN
key. For example if the ruler shows 8, you multiply this by 10 to get 80. Enter 80 as
shown in the picture above. After you have this parameter entered, push the
WHEEL
PARAMETERS INPUT AND SHIFT KEY to navigate to the next parameter.
The second parameter will look like this: