13
Important Operating Instructions
MAINTENANCE
WARNING: Disconnect air compressor from the power source and bleed off all air pressure
before attempting any maintenance or repair.
SHUTDOWN & STORAGE
NOTE:
NEVER stop the air compressor by unplugging it from the power outlet as this may result
in damage to the compressor.
1.
Turn the switch to the OFF position.
2.
Disconnect the power cord from the power outlet. Disconnect the power cord from the power
outlet by grabbing the plug (not the cord). Loop around electric cord holder for storage.
3.
Turn the pressure regulator knob fully counterclockwise to close airflow from air outlet port.
Check the outlet pressure gauge to ensure that it reads 0 PSI.
4.
Remove the air hose and any air accessories.
5.
Drain moisture from the air tank by slowly opening the air tank drain valve by turning
counterclockwise. Tilt tank to remove all moisture. Once all the moisture has drained out, close
the fitting securely.
6.
Allow the compressor to cool down.
7.
Wipe the air compressor clean and store it in a clean, dry, and non-freezing location.
WHEN PERFORMING ANY MAINTENANCE OR SERVICE:
1.
The air compressor must be turned off.
2.
Disconnect compressor from the power source.
3.
Open tank drain to bleed off all air pressure before attempting any maintenance or
repair.
4.
Allow compressor to fully cool before attempting any maintenance or repair. Check the
air compressor frequently for any visible problems and follow maintenance procedures
each time the compressor is used.
