National Communications
Page 7
STROBE LIGHT INSTALLATION
A white connection box is supplied to allow for easy user connection of
this accessory.
The box has two leads connecting from it :
STEP 1.
The short Cream coloured telephone cable with the RJ plug
should be plugged into the Relay Output port of
TLM
.
STEP 2.
A 10m figure 8 cable with Red and Red/Black wire, is supplied
connected to the Positive (Red) and Negative (Red/Black) wires of the
Strobe Accessory, using a connection block.
You can lengthen or shorten this cable, but it is VERY IMPORTANT that
you maintain polarity of the wires.
The Red wire from the Connection Box must connect to Red wire
connected to the Strobe Accessory only.
The Black/Red wire (Red wire with Black stripe) from the Connection Box
must connect to Black wire connected to the Strobe Accessory only.
Polarity is important. Failure to maintain polarity
will cause fatal damage to the Strobe Accessory.
