background image

ALTERNATIVE MODEL

DUET SWITCH 2

If your Fax device cannot answer the short rings that are produced by
the FaxStream Duet service, you will need to use our alternative DUET
SWITCH 2
 device. This device will allow ANY Fax or Fax/Modem to
operate with the FaxStream Duet service.

Our DUET SWITCH 2 device is programmed to ANSWER an incoming
FaxStream Duet call after 1 ring, and the output NORMAL RING to your
Fax Device so that it can answer the call and receive the Fax
transmission.

Our premium DUET SWITCH 2 device also has several other useful
features that may be important for some users.

With DUET SWITCH 2:

* You can also transfer Fax calls sent to your Normal Number to your
Fax device.

This is useful for those customers that have used the same number in
the past for Voice and Fax.

* If you have telephones connected to other telephone sockets, then
you will only hear ONE ring whenever a Fax call is sent to you (With
DUET SWITCH 1 you will usually hear 2 or 3 rings).

* You will not encounter any situations where your TELEPHONE or FAX
DEVICE will NOT DIAL OUT (which with DUET SWITCH 1  requires Sw
2 or 4 to be set to ON) as DUET SWITCH 2 has a new High Voltage Line
Level facility.

National Communications   Page  11

Содержание DUET SWITCH 1













Отзывы: