Page 10 National Communications
DIP SWITCH SETTINGS
Four Micro Dip Switches are located on the underside of the Line Sharer.
Switches 1 and 3 are not used on this device.
Switches 2 and 4 are used to vary the operation of this device.
Please ensure that you understand the significance of each switch, as
described elsewhere in this User Guide, before altering their position.
If SW2 is set to ON -
Fax REQUIRES connection to the telephone line to dial
If SW2 is set to OFF -
Fax DOES NOT REQUIRE connection to the line to dial
If SW4 is set to ON -
CallerID device IS connected to Primary Number port
If SW4 is set to OFF -
CallerID device NOT connected to Primary Number port