Page 8
Natcomm
LOCK CONTROL
DS-SIP
is provided with TWO internally fitted relays which can be used to control
TWO LOCKS or ONE LOCK and ONE OTHER DEVICE such as a Video Camera,
Recorder or Light. Relay Specification - Dry Relay Contacts rated at 12V/1Amp.
Do not use the supplied DS-SIP Controller 12V plug pack to also provide 12V power for
the lock, as this may cause damage to DS-SIP. You must use a separate 12V source, with
a maximum rating of 12V/1A.
LOCK 1 RELAY FACILITY
To OPEN the Door/Gate Lock after answering a call from your DOOR PHONE you
need to press
**
on your telephone. The lock will remain open for 15 seconds
(Default setting). It can be set from 01-99 secs.
Your Door/Gate Lock can also be OPENED at any time by calling the
DS-SIP
Extension Number and pressing
**
. The Door/Gate Lock will remain UNLOCKED
for 15 seconds (can be 01-99 secs). You do not need to receive a call from the
Door Phone first.
LOCK 2 RELAY FACILITY
To OPEN the ALTERNATIVE Door/Gate Lock after answering a call from your
DOOR PHONE you need to press
*2
on your telephone. The lock will remain open
until you HANG UP your telephone.
Your ALTERNATIVE Door/Gate Lock can also be OPENED at any time by picking
up any telephone and dialling
*2
. The Door/Gate Lock will be LOCKED as soon as
you hang up. You do not need to receive a call from the Door Phone first.
With the LOCK 2 facility, you can also call into
DS-SIP
, press
*3
and then HANG
UP at any time, which will CLOSE the Internal Relay and leave it closed.
You can also call into
DS-SIP
, press *4 and then HANG UP at any time, which will
OPEN the Internal Relay and leave it open.
