DESCRIPTION
DS-SIP
is a Door Station Controller designed to operate with Any NATCOMM
Door Phone Intercom (see page 3).
DS-SIP
has a full Analog Telephone Adaptor (ATA) incorporated within its design.
The ATA should be set to ‘Hot Dial’ (called ‘Hot Line’) your desired PBX Extension
or Extension Group whenever it is triggered by an attached NATCOMM Door
Phone.
DS-SIP
can be connected to ANY Point on a Local Area or Wide Area
Network, such as :
* Any Internal Network Point of a LAN
* Direct to a Network Switch
* Direct to a Network Modem used for LAN or WAN
Once connected,
DS-SIP
will connect to the Network via DHCP
A Windows based program (called Natcomm SIP Controller) is supplied for
your
DS-SIP
unit. This program is designed for use on PC running Windows 7
or later (on your same network). Install the program by double clicking the
supplied Program file. The program will install and a Natcomm Icon will be
installed on the desktop.
You will be emailed an FTP Link to download the DS-SIP setup program :
Natcomm_IP_Controller.exe
DS-SIP
is supplied as a complete kit, ready for quick and easy installation by a
technician or an end user with some IT experience.
A connection box and a short CAT5 cable is supplied to connect
DS-SIP
to the
Door Phone Intercom and its Internal Relays to 1 or 2 Door LOCKS OR Gates.
