Page 12
+
LED BRIGHTNESS
POT ADJUSTMENT
Adjustment Pot
is located here
under a white
plastic sealing
cap.
The brightness of the WHITE and BLUE lights (LED’s) that illuminate
the front panel of the DP5 can be adjusted to suit.
This is done by adjusting a Micro Pot, which is located under a white
plastic sealing cap (see diagram above). There are 3 separate Micro
Pots and White sealing caps on DP5. You should use the Pot located
under the Top-Left white sealing cap. You will need to use a small flat
blade or start blade screwdriver to make the adjustment.
To
REDUCE
the brightness, turn the Pot
CLOCKWISE
To
INCREASE
the brightness, turn the Pot
ANTI-CLOCKWISE
