Page 6
National Communications
USER CODE PROGRAMMING
SINGLE LOCK OR GATE USE
TO ENTER OR DELETE A USER CODE
1.
PRESS ### on the DP5 keypad.
(you will hear 2 beeps)
2.
ENTER your 4-6 digit Owner Code, followed by #
(you will hear 2 beeps)
A.
TO ENTER A NEW USER CODE
i) Press #1
(you will hear 2 beeps)
ii) Enter the New User Number (01 - 99)
(you will hear 2 beeps)
iii) Enter the New User Code (4-6 digits)
iv) Press #
(you will hear 2 beeps)
OR
B.
TO DELETE AN EXISTING USER CODE
i) Press #1
(you will hear 2 beeps)
ii) Enter the User Number (01 - 99)
(you will hear 2 beeps)
iii) Enter 0000#
(you will hear 2 beeps)
Note : User Codes cannot be changed, they must be
deleted first and then re-entered.
