UPDATING TIME AND DATE
The internal clock of
BMS
may need to be updated from time to time, for time
sensitive applications, or to correct for daylight savings, should this be
necessary. This is easily achieved by inserting a
blank
SD or SD-HC Flash
Card which is programmed with the correct time.
STEP 1
- Ensure that the Time and Date of your PC is accurate. If it is
not, adjust it now so that it is correct.
STEP 2
- Insert a
BLANK
SD or SD-HC Flash Card into the Flash
Card programmer of your PC.
STEP 3
- Enter the ‘Set Unit Date and Time’ option of the BMS Control
Program.
STEP 4
- The Control Program
will then display the Date and
Time of your PC.
(adjust the time if your PC time is not correct)
Press OK to write this
time and date
to the Flash Card.
STEP 5
- Without Delay, insert this Flash Card into the MUSIC
CARD port of your
BMS
.
This Time and Date will be written to the Internal Clock of BMS. After 5
Flashes the new time will be displayed and you can remove the card.
National Communications
Page 13
