5
4. MIDA installation
4.1 Mechanical installation
MIDA on motor
MIDA can be installed directly on motor terminal box in
horizontal or vertical position.
Check with motor manufacturer if it can be operated by
inverter and verify the compatibility of MIDA base with motor
terminal box (see drawing).
The rubber gasket on MIDA base grants the sealing between
MIDA and motor case.
Pierce the rubber gasket only in correspondence of the 4
threaded holes on motor case.
If possible use the same screws and washers which fixed the
terminal box on motor case.
See below instruction how to mount MIDA on motor.
WARNING: after installation check ground earth continuity
between motor case and MIDA.
1
2
3
4
