Nassenheider Fill Up 2, Руководство пользователя

Страница: 23 / 44

Putting into operation 23
7.7 External switches
7.7.1 Microswitch
Fig. 20: Microswitch (Art.
307039)
The microswitch is to be adjusted at the Y-bracket so that it triggers the filling
process when the jar is pressed. It is active only in
Auto mode . The key can also
be used instead of the microswitch. The key is due to increased wear not suitable for
continous operation.
We recommend the microswitch only for filling jars with an opening Ø from 30 mm.
To avoid accidental triggering of the filling process, the microswitch should be
connected only when all preparations for the filling (priming and calibration) are
completed.
7.7.2 Foot switch
Optionally available as accesory.
Fig. 21: Foot switch
(Art. 303029)
The foot switch is connected parallel to the key of the keypad in all operating
modes, and has therefore exactly the same functionality. The key is due to increased
wear not suitable for continous operation.
It is suitable for filling all jar types.
To avoid any accidental triggering of the filling process, the foot switch should be
connected only when all preparations for the filling (priming and calibration) are
completed.