Nassenheider Fill Up 2 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 44

Nassenheider Fill Up 2 Скачать руководство пользователя страница 31

Operation

31

9.2.1

Manual mode

This mode of operation is used to prepare for the filling (to prime the product in order
to fill the priming hose and the pump head) and for continuously pumping (e.g. pumping
from one container to another one).

Forward continuously

Pressing the

key briefly will start the filling prozess. Pressing a second

time will stop it. The product is pumped from above through the pump
head.

Forward interval

The product is pumped as long as the

key is pressed. Without pressing

anymore the motor stops. The product is pumped from above through the
pump head.

Reverse continuously

Pressing the

key briefly will start the filling prozess. Pressing a second

time will stop it. The product is pumped from below through the pump
head.

Reverse interval

The product is pumped as long as the

key is pressed. Without pressing

anymore the motor stops. The product is pumped from below through the
pump head.

The filling nozzles must be removed for both reverse pump
options. They would offer too much resistance in the pumping
process and would thereby be damaged. There is also the risk of
overloading the motor.

«
...
29
30
31
32
33
...
»

Содержание Fill Up 2













































Отзывы:

Нет отзывов