Page 3 of 3
3. Operation Descriptions
3.1 Figure 1 shows the connectivity diagram of TV-Watch transmitter for connection
of the TV set and power. Select one of the 4 radio channels by switching the
channel selection switch.
3.2 Switch on the power at the receiver using On/off switch.
3.3 Press the reset button once to reset the receiver
3.4 Press the scan button to scan the active radio channel
3.5 If the scanned channel is not the one you expected, press scan again OR press
reset and than scan again.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the User’s
authority to operate the equipment.
