CONNECTION OF THE OUTDOOR SENSORS WITH THE WEATHER STATION
The outdoor sensors connect automatically after 1 minute. Otherwise, you can connect the devices
manually:
- Press button (5) for 3 seconds, the indicator (25) flashes.
- When the weather station detects the sensors, the outdoor temperature will be displayed (24).
- The sensors data are sent automatically about every 3 minutes.
CHOICE OF SENSOR DISPLAY
To toggle between the data from the sensors:
- Use button (5) for selection (CH1 / CH2).
2 - SETTING THE TIME AND DATE
- Press button (13) for 3 seconds to enter the time and date setting mode.
- Use buttons (9) and (10) to adjust the values. Hold the buttons down to speed up scrolling.
- Press button (13) to validate the selected digit.
- The day of the week is displayed automatically (18).
- If the buttons are not pressed, the unit returns to the normal display after 15 seconds.
3 - SETTING THE ALARM
SETTING AND ACTIVATING THE ALARM
- Press button (7) for 3 seconds. The symbol «AL1» appears on the screen.
- Use buttons (9) and (10) to set the alarm hour. Press button (7) to confirm. The minute digit
flashes.
- Use buttons (9) and (10) to set the alarm minutes. Press button (7) to confirm.
- Select the alarm mode (Beep / Radio) using buttons (9) and (10).
● Beep alarm: the symbol «bb»
appears on the screen.
● Radio alarm: the symbol «rAd»
appears on the screen.
The alarm will activate the last
station listened to.
- Press button (7) to confirm.
- The «AL2» symbol appears on the screen and flashes.
- Proceed in the same way as for alarm 1.
- To select one of the two alarms, press button (7).
- The screen will display consecutively the symbols «AL1», «AL2» then the 2.
- Press button (7) again to deactivate the alarms (no symbol is displayed).
SWITCHING OFF THE ALARM
The alarm will go off at the programmed time. To stop the alarm, press button (7). It will sound again
the next day at the same time.
SNOOZE FUNCTION
- When the alarm sounds, press SNOOZE (5): the symbol Z
Z
flashes and the alarm stops.
- The alarm will sound again after 9 minutes.
- The snooze function is active as long as the symbol flashes on the display.
- To cancel the snooze function, press button (7) or (13).
