23
NARVON
Caution! Any operation on the lid must be
carried out manually. Do not use any tool, as
they might damage the lid or its components.
The lid top “V” is assembled to the clear
bottom “X” by applying pressure with your
hand. To disassemble it, hold the top “V” with
one hand, while you pull the bottom “X” with
the other hand.
7.8.1. Bulb replacement
The bulb must be replaced only when the
main switch is in position -0- and power cord
is unplugged.
“S” as showed in Figure 44 and 45. Remove
“T” and replace it with the new
one. Replace cover “S” on lid top “V”
properly.
7.9. Cleaning the condenser
The condenser may be cleaned solely by a
specialized technician, who must organize
all of the operational sequences and use
suitable equipment, in strict compliance with
the applicable regulations currently in force.
Periodically clean the condenser situated inside the
machine.
Warning: Removing safety guards will expose
some sharp surfaces of the machine.
Warning: A dirty condenser will impair
machine performance.
It is forbidden to use the machine when even
only one panel (front, rear or side) is not
set properly in place. It is prohibited for the
operator to clean the condenser.
7.9.1. Cleaning the condenser for
#378SM1
The safety guards must be removed by means of a suitable
screwdriver.
right sides).
7.9.2. Cleaning the condenser for
#378SM2 and #378SM3
The safety guard may be secured in place using mechanical
manually without the aid of any tool.
Fig. 45
Fig. 46
Fig. 47
Fig. 48
