20
NARVON
5. Take out the auger and remove the seal (A).
7.4. Washing and sanitizing the
components
All of the previously disassembled and removed components
Important: the sanitizing solution must
comply with the regulations enforced at the
time the machine is used.
(2% of sodium hypoclorite mixed in water).
3. Thoroughly wash again with clean water.
for 30 minutes.
7. Thoroughly wash again with clean water.
8. Place the components on a clean surface and dry them.
Warning: Do not submerge lids equipped
with lighting in any type of liquid. Before
starting the cleaning and sanitizing
operations of the lid, remove it from the
machine as described in the previous
chapter.
sponge soaked in fresh water.
It is forbidden to wash and/or sanitise the lid
while it is installed in the machine.
7.5. Reassembling the washed
components.
carefully reassembled. Some components must be
adequately lubricated in order to ensure that they work
Apply the seal (A) on the auger as shown in the Fig.35.
A
X
Fig. 33
Fig. 34
Fig. 35
