8
CLEANING & MAINTENANCE
Cleaning
Be careful of scalding caused by residual heat. Please wait until the jar fully cools before cleaning.
After the drink is made, cooled, and poured out, please immediately clean the blender.
After used the Cooking Blender, clean the outside surface of the main base with soft wet cloth. Do not immerse
the blender into the water or any liquid Dot not spay water on any part containing electrical components such as
the main base and jar base.
When cleaning, rinse the jar interior and accessories with clean water, and wipe off residual water. The blades
are very sharp. Be careful with the blades to avoid cuts during cleaning.
Do not use abrasive detergent or corrosive liquid (such as gasoline and acetone) to clean the device.
If any part of the blender is stained by fruit/vegetable juice or other drinks, add several drops of edible oil to
wipe the strains before rinsing it with clean water to better remove the stains. Please wipe off residual water
after rinsing any parts with clean water.
If any residues in the jar form a hard block that is difficult to remove, please add an appropriate amount of
water to soak it first, and then rinse and wipe it off after it is softened.
While you are using this unit, minerals dissolved in the water can get stuck on the stainless bland. This is call
scalling and it is not harmful. To maintain the performance, clean the blender by using citric. Be careful of the
blades to avoid cuts when wiping them. Do not wipe the device after it is powered on.
Maintenance
If the device is not used for a long time, please keep it in a dry and ventilated place to prevent the motor from
being affected by moisture.
