NARGESA PP200, Инструкция, Страница: 8 / 48

INSTRUCTIONS BOOK HORIZONTAL PRESS BRAKE PP200 7
1
2
3. MAINTENANCE AND CLEANING
There are two aspects to take in to account with respect to the maintenance and cleaning of the Horizontal
Press Brake NARGESA PP200, these are:
- Hydraulic Maintenance
- Cleaning maintenace
3.1. Hydraulic maintenance
As the Horizontal Press Brake NARGESA PP200 possesses a hydraulic mechanism, it is necessary to
periodically check the oil level tank. The machine is equipped with a low oil indicator (1) which permits us to
observe the level of oil. This should be carried out with the machine on the standby and off position.
Figure 7. Positions of the Hydraulic maintenance elements
If the level is low it should be filled with hydraulic oil HM68 through the tank cap (2) until it is visible in the
low oil indicator (1) (approximately half way up the indicator). This level should be checked once every
three months.
3.2. Cleaning
The daily usage of the Horizontal Press Brake NARGESA PP200 can generate metallic waste such as
(slag, shavings, etc.) which can damage the running of the machine. We recommend that the machine be
cleaned, especially the work area, at the end of each day.