NARGESA PP200, Инструкция

Страница: 12 / 48

INSTRUCTIONS BOOK HORIZONTAL PRESS BRAKE PP200 11
Forward stop point knob (1) Backward stop point knob (2)
5.3. Displacement adjustments
As aforementioned the Horizontal Pree Brake NARGESA PP200 has a maximum displacement of 250mm,
this displacement may be excessive depending on the accessory used. To control the displacement, the
PP200 has a regulation panel on its side for the purpose of adjusting it.
Figure 11. Regulation panel
To regulate the position, the selected working mode must be taken into account: manual or automatic.
1. Manual mode:
Moving the limits of the displacement of the headstock forwards or backwards, the machine will move to
the position indicated by the stop knob.
2. Automatic mode:
Standby position: moving the backward stop point knob (2), the machine will move until it reaches the
indicated position automatically.
Setting the forward stop point has two options:
The first option is to move the forward stop point knob (1) to the required position and verify the position
using the pedals to advance until the machine reaches the indicated place.
The second option is, once the machine has reached the indicated position, keeping pressure on the pedal
move the forward stop point knob to the desired position, once set the machine will go forward until the
position indicated.
In this way we are able to carry out a more precise adjustment of the final position, releasing pedal will
regain the original position.
Once adjusted we advise you to run a trial cycle (without material) to verify the positions and if necessary to
repeat the operation.