NARGESA MT150, Инструкция

Страница: 6 / 45

TWISTING MACHINE MT150 A INSTRUCTIONS BOOK 5
1. MACHINE INFORMATION
1.1. Machine identification
Trademark : NARGESA
Type: Twisting machine
Model: MT150A
2.2. Normal use of the machine
The twisting machine is used to shape cold forge materials. It scrolls bars, it makes spirals out of flat bars,
etc. All drawings that can be made by using a rotary head and a stand point will be able to be carried out
with this machine. It’s only shortcoming is the physical space it occupies and the power of the engine.
A set of standard tooling are provided with the machine, by means of which most of the basic shapes will
be makeable. However the manufacturer may supply the head adjustment bases, for you to make your own
drawings.
1.3. Contraindications for the use of it
Every use out of the ones directed to the cold forge work.
1.4. Noise caused by the machine
In case of this machine noise is almost non existent under a normal working condition.
1.5 Vibrations
Like noise, vibrations could be considered non-existent since it is a fixed machine and the head rotation
speed is low.
1.6 Natural working place of the user
The twisting machine could be used by one opeartive at the time who will be located at a side of it.
1.7. Description of the machine
The machine is equipped with an engine of 0,37 Kw / 0,5 HP and a reducer that transmits rotation to the
head through a Crown and the body. This is the stand where all the different stand points are located.
The twisting machine has got a box to keep all tooling and the stand table made of steel plate welded and
folded.
If an accident occurs by negligence of the operative, for not following the safety rules exposed
on this manual, PRADA NARGESA S.L will not accept any responsibility.