NARGESA MT150, Инструкция

Страница: 13 / 45

TWISTING MACHINE MT150 A INSTRUCTIONS BOOK 12
6. EXPLANATION OF ITS PERFORMANCE
6.1. Introduction
The electronic control module has been specifically designed in such way that is rules, either one or the
other machine: MT150A or MT150R.
What is stated above could be easily understandable since these two machines have similar characteris-
tics, and so from now on when referring to either one or the other we will use a generic term, such as
“twisting machine”.
6.2. Definition of the module for Control and Commands.
Head turn to the right
Head turn to the left
Control of manufactured parts o CNT
Escape
Programming
Definition of square torsion
Definition of circular torsion
Pull out
Memory for pieces
* ON during parameters configuration
* ON dduring the invertir performance
* ON during forwarding
* ON during rewinding
It allows moving on through the codes or increase
the value of one parameter
It allows to move on through the codes or reduce the
value of one parameter
It allows to move among groups / numbers of figures
inserted on parameters
It allows to edit parameters or keep the inserted
values
It commands to start up
It allows to stop while it’s running
RST: Resets faults
It allows to change the speed reference frequency