Using Markers
61
Working with delta markers
All markers can be set to show values according to their position or to display deltas to
another marker. The settings can be changed directly from the
Button bar
or from the
Marker Configuration
menu.
Setting a marker to delta from the Button bar
A delta marker can be defined directly from the
Button bar
. When set from the
Button bar
only marker 1 can be the referenced marker. To select another marker as reference, see
Setting a marker to delta from the Marker Configuration menu
To set a marker as delta marker:
1.
In the
Button bar
select a [marker].
The selected marker is displayed above the measurement display.
2.
In the
Type
field select
Delta
.
The name of the marker in the marker list is changed from
Mx
to
Dx
(e.g.
M4
to
D4
).
The displayed values are the differences to marker 1.
Setting a marker to delta from the Marker Configuration menu
When setting a marker to delta from the Marker Configuration menu, any other marker can
be chosen as a reference.
To set a marker as delta marker:
1.
In the
Button bar
tap the
Marker Conf.
button.
The
Marker Config
menu opens.
2.
In the
Type
field select
D
.
The type of the marker in the marker list changes from
M
to
D
. Marker 1 is set as
reference (default).
To select a reference marker:
The
Marker Config
menu is displayed.
1.
Select a delta marker from the list.
2.
In the
Button bar
tap the
Ref.
button.
A dropdown list opens in the display header.
3.
Select a marker from the list.
4.
Tap the header of the
Button bar
twice to close the menus.
