NARDA PMM 1008, Руководство пользователя

Страница: 27 / 40

Operating Instruction 3-7
3.2.4 Manual mode
Manual mode
stand-by
Using this function it is possible to do a test and change the field level
during test, this feature can help to measure the level of susceptibility of
the equipment under test.
Pressing the MAN key the display will show the following:
Choosing 10A key or 100A key the PMM 1008 will enable the output
current, the operate led will switch on and the display will show the
following:
In the second row left side there is the time increasing indication, in the
right side the indication of the field.
Pressing the [+] and [-] keys it is possible to increase or decrease the field
level. If the band selected is 100 A the maximum current is 160 A and the
maximum field depends from the antenna factor.
If the band selected is 10 A the maximum current is 16 A, the maximum
field depends from the antenna factor but the resolution using the [+] and [-
] key is higher.
Pressing the STBY key the PMM 1008 will disable the output current, the
operate led will switch off and will show the following display:
The [+] and [-] keys are disabled, pressing the ON key the PMM 1008 will
go back in the previous menu and pressing the BACK key will stop the
manual mode and will go back in main menu.