21
Schedule: FTP
Communication: Wi-Fi
Wi-Fi: SSID WLan is the name ot the Wi-Fi network you intend to use
Password, the password of the Wi-Fi network
Remote Address: the IP address you assign to the area monitor, default 192.168.1.115
Port: the port used by the area monitor for the Wi-Fi communication, default 5000
AP Password, it is not mandatory, it is a protection password to assign to the station
All other field can be left blank.
Press SET and then Exit
Every time you switch a AMB-8059 ON, it starts to work in Direct AP mode. After
some minutes the area monitor will switch on the correct modality set in Data
Transfer Settings. Due to it has unique IP address we have to add its MAC ddress
in the router ‘s IP list.
The MAC address is written in the area monitor certification.
You have to enter in the router control panel you intend to use. Look for DHCP
settings and the option “Add Manually”.
This section is different for every router, every brand, every access point. We
recommend to read instructions of the device you intend to use to have the Wi-Fi
connection.
Once the area monitor we be recognized by the router, in the group of possible
devices, you hav eto select it and specify the IP to use. The IP to use must match
with the Remote Address you set in Data Transfer Settings window.
Normally, every area monitor, in addition to its MAC address, is normally recognized
as WiFly Ezx
Also consider that a lot of fre Wi-Fi networks, request to change the user name and
password after a specific time. We suggest to use only networks where this option
is not acivated.
