Napoleon SDO1000, Инструкция по установке и руководство пользователя

Страница: 4 / 15

due to weak or broken springs, or being out of balance.
- Frequently examine the installation, in particular check cables, springs and
mountings for signs of wear, damage or imbalance. Do not use if repair or
adjustment is needed since a fault in the installation or an incorrectly balanced door
may cause injury.
- Each month check that the drive reverses when the door contacts a 50 mm high
object placed on the floor. Adjust if necessary and recheck since an incorrect
adjustment may present a hazard, for drives incorporating an entrapment
protection system depending on contact with the bottom edge of the door.
- Details on how to use the manual release.
- Information concerning the adjustment of the door and drive.
- Disconnect the supply when cleaning or carrying out other maintenance.
- The installation instructions shall include details for the installation of the drive and
its associated components.
Basic function introduction
1. Soft start, soft stop Minimize start-up load on garage door opener and garage door
2. Opening & closing force self-learning
3. Overloading force detecting , the door will reverse more than 15 cm automatically when
it is overloaded when closing.
4. Safety resistance adjustable , with a wide range, sensitive and reliable.
5. L.E.D light for caution
6. Wall switch interface available .
7. Photo beam , the door will change to open when obstruction is detected while closing.
8. Low-voltage protection , the process will not perform any action of opening and closing
when voltage is too low
, door panel and controller won’t be damaged.
9. We adopt rolling code transmitter
, with billions of codes, won’t be coincident code or
pirated code.
10. Back up battery interface available, in case of power failure.
11. Keypad interface available.
12. With auto-closing feature .
13. Metal bottom plate, stronger and security.
14. O/S/C button B , make adjustment, maintenance and emergent opening or closing
convenient. (Below picture)
15. External fuse A . (Below picture)
B
A