EN
W415-1751 / 04.25.17
9
installation
Due to the many different materials used on different walls, it is highly recommended that you consult your
local builder before you install this appliance on the wall.
A.
Select a location that is not prone to moisture and is located at least
3 feet (1m) away from combustible materials such as curtain drapes,
furniture, bedding, paper, etc.
B.
Remove the wall mounting bracket from the appliance by unscrewing
the 2 fasteners from the wall mounting bracket as shown, see Figure
2.
C.
Have two people hold the appliance against the wall to determine the
final
location.
D.
Mark out location, then mount the bracket onto the wall using the 5
supplied screws. This bracket MUST have the slots facing upward
and
be
level.
E.
With the wall mounting bracket installed have two people lift the
appliance up and align the hooks on the back of the appliance with
the slots on the wall bracket, Figure 1.
F.
Secure the appliance to the wall bracket using 2 metal screws, see
Figure 2.
G.
Check the appliance for stability ensuring that the bracket will not pull
free from the wall.
3.2 installing the appliance
3.2.1 wall mount installation
REAR VIEW
SLOTS
SIDE VIEW
BRACKET
SCREWS
GLASS
X2
Fig. 1
Fig. 2
REAR VIEW
SLOTS
SIDE VIEW
BRACKET
SCREWS
GLASS
It is strongly recommended that the mounting bracket be screwed into
the wall studs where possible. If the wall studs cannot be used, ensure
that the supplied plastic anchors are used to affix the bracket to the wall
and the bracket is adequately secured.
The wall bracket is fixed on the back of the appliance.
note:
note:
X5
X5
A
D
E
C
B
