Napoleon NEFL42WM-1C, Инструкция по установке и эксплуатации

Страница: 15 / 44

EN
W415-3029 / A / 06.30.21
15
7.0 operating instructions
Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate.
7.1 operating control panel and remote control
The timer indicator on the control panel will light up to the corresponding
setting. It will have a series of different combinations to show which setting is
on. For example, the 3.5h setting will have 1/2, 1, and 2 light on to indicate it
is a total of 3.5h.
note:
Power
Turns the appliance on / off.
Timer
Controls the timer.
The timer can be programmed to run the appliance for
specific lengths of time (30 mins. minimum to 7.5 hrs.
maximum).
Flame Control
(The flames stay on until power
is turned off. Flame must be on
for the heater to turn on).
Controls the height and brightness of the flame.
Heater Control
(Flame must be on for the heater
to turn on).
Turns the heater and blower on / off.
2 Settings: Low Heat and High Heat.
The heater will blow cool air for 10 seconds after
it turns off. This prevents the appliance from
overheating.
Back Lights
Control
Controls LED back lights.
10 Settings: Orange, red, blue, yellow, green, purple,
azure, carmine, white, pink.
NOTE: The appliance will auto-cycle through colours
after pressing the button 11 times. It will be locked
after pressing the button 12 times, and the back lights
will be turned off after pressing the button 13 times.
This remote control must remain within 26 feet (8 meters) of the appliance to be effective. This range may be
reduced as the battery power is depleted.
note:
Side View
Remote
Control
Control Panel
NAPOLEON
Indicator
Remote Control
Heater
Back Light
Flame Control
Timer
Power