Napoleon Knightsbridge VF Series, Инструкция по установке и эксплуатации

Страница: 8 / 28

W415-1966 / 07.08.19
EN
8
general information
1.4 dimensions
30 1/2"
(774.7mm)
27"
(685.8mm)
17 7/8"
(454mm)
17 3/4"
(450.9mm)
SHIPPING BRACKET REMOVAL
A.
Remove the four screws holding the shipping bracket to the bottom of the appliance.
B.
Lift the appliance off the skid and set on a fl at surface.
C.
Discard the screws, brackets, and skid.
SHIPPING BRACKET
1.5 shipping bracket
• The top casting is not fastened to the appliance assembly. It simply sits on the appliance as a lid. For shipping
purposes, it is held in place by plastic strapping. Once the strapping is cut, the top should be lifted off care-
fully and stored in a safe place to avoid damage while completing the installation of the appliance. To avoid the
appliance being damaged during shipping, a shipping bracket has been used and must be unbolted before the
appliance can be installed.
!
WARNING