Napoleon HDX35, Инструкция по установке и эксплуатации

Страница: 21 / 28

I. Placez la bûche haute à droite (I) sur
l’encoche de la bûche à fond arrière (A)
et l’encoche de la bûche avant droite
(E). Assurez-vous de repousser la bûche
haute à droite (I) tout le long du panneau
arrière.
J. Alignez l’épingle sur le dessus de la
bûche haute à doit (I) avec le trou du
dessous de la bûche haute central (J).
Assurez-vous de rester le haut de la
bûche haute central (J) sur la bûche
arrière dessus (B).
K. Alignez l’encoche de la bûche charbon
avant (K) avec le deuxième barreau
du chenet, en assurant que la bûche
charbon avant (K) est à plat. Prenez soin
de ne pas couvrir les orifices.
L. Alignez l’épingle sur le dessus de la
bûche centrale (C) avec le trou du
dessous de la bûche croisé centrale (L).
Assurez-vous de rester la bûche croisé
centrale (L) sur la bûche croisé avant
gauche (G).
G. Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H. Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I. Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J. Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K. Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L. Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
the front left crossover log.
G
H
I
J
K
L
G. Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H. Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I. Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J. Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K. Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L. Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
the front left crossover log.
G
H
I
J
K
L
G. Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H. Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I. Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J. Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K. Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L. Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
G
H
I
J
K
L
G. Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H. Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I. Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J. Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K. Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L. Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
G
H
I
J
K
L
G. Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H. Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I. Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J. Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K. Place the notch in the front charcoal
L. Align the pin in the bottom of the
G
H
I
J
K
L
G. Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H. Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I. Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J. Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K. Place the notch in the front charcoal
L. Align the pin in the bottom of the
G
H
I
J
K
L
F
E
G
C
I
W415-2193 / D / 11.08.18
21
installation
FR