G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L.
Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
the front left crossover log.
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L.
Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
the front left crossover log.
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L.
Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L.
Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
L.
Align the pin in the bottom of the
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
L.
Align the pin in the bottom of the
G
H
I
J
K
L
F
E
G
C
I
G.
Align the 2 holes located on the bottom of
the front left crossover log (G) with the 2
studs on the left side of the burner. Ensure
to rest the front left crossover log (G) on
the front left log (F).
H
.
Align the 2 holes on the bottom of the
right middle log (H) with the 2 studs on
the right side of the burner. Adjustments
may be needed to ensure correct
placement.
I.
Place the top right log (I) on the notch of
the bottom rear log (A) and the notch of
the front right log (E). Ensure to push the
top right log (I) all the way back against
the rear panel.
J.
Align the pin on the top of the top right
log (I) with the hole on the bottom of the
top middle log (J). Ensure to rest the top
middle log (J) on the top rear log (B).
L.
Align the 1 pin on the top of the middle
log (C) with the hole on the bottom of the
middle crossover log (L). Ensure to rest the
middle crossover log (L) on the front left
crossover log (G).
K.
Align the 1 bottom notch of the front
charcoal log (K) with the 2nd grate
post, ensuring the front charcoal log (K)
lies flat. Do not cover any ports on the
burner.
W415-2193 / D / 11.08.18
EN
6
installation
Содержание HDX35
Страница 13: ...EN W415 2193 D 11 08 18 13 5 0 notes 29 1...
