4
W415-0712 / B / 09.20.11
2.4 NIGHT LIGHT™ INSTALLATION
GASKET
LENS
FRAME
COLOURED SIDE UP
NIGHT LIGHT
1
2
1
The porcelain base is shipped separate from the appliance
and is included with the burner assembly.
INSTALL IN THE FOLLOWING ORDER:
NOTE: Burner assembly must be installed fi rst.
A.
Side porcelain panels or brick panels must be
installed prior to porcelain base and glass. For
side porcelain panel installation see “PRP81
PORCELAIN REFLECTIVE RADIANT PANEL”
leafl et and for brick panel installation see “GD844KT
DECORATIVE BRICK PANEL - SANDSTONE”
leafl et.
B.
Position the porcelain wire shields into the holes
in the bottom slots of the side porcelain panels.
There are tabs on the top of the shields so they
can only go in so far until they hit the fi rebox side.
Carefully place the porcelain base 2 over the wire
shields until it sits fl at on the fi rebox base.
Porcelain
Base
Porcelain Wire Shields
2.5 PORCELAIN BASE INSTALLATION
Your HD81 comes equipped with 2 “Night Lights™”.
The lights have been pre-wired and are controlled from the
remote control.
Included with the burner assembly are the frames, lenses and
gaskets that need to be installed as illustrated.
THE FIREBOX MUST BE SEALED.
Over tightening the screws could break the lens.
“Light Leakage” from the holes in the housing lamp may be
observed. The holes in the lamp housing are necessary for
ventilation and must not be covered.
1
Содержание HD81
Страница 8: ...8 W415 0712 B 09 20 11 44 1 5 0 NOTES...
