manualshive.com logo in svg

Napoleon HD4N, Инструкция по установке и эксплуатации, Страница: 47 / 51

Поделиться
Скачать
Napoleon HD4N Скачать руководство пользователя страница 47

W415-1146 / A / 02.16.13

 47

EN

10.4 BURNER REMOVAL

10.4.1 

LOG BURNER REMOVAL (HD4ST AND HD4P ONLY) 

A.

 

Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.

B.

 

Vacuum the glass media out of the appliance. Ensure you insert a clean bag into your vacuum cleaner.

C.

 

Remove the 12 screws securing the media tray, then remove the media tray from the appliance, as 
shown below.

D.

 

Remove the 4 screws securing the burner, as shown below. Then slide the burner off of the ori

fi

 ce and 

remove from the appliance. 

E.

 

To reinstall the burner reverse these steps. 

NOTE: When reinstalling the burner ensure that the 

venturi rests on the orifi ce.

D

C

A.

 

Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.

B.

 

Carefully remove the logs from the appliance.

C.

 

Remove all of the hearth pads, from the appliance. Refer to the "HEARTH PAD INSTALLATION/
REMOVAL" section for instructions.

D.

 

Remove the 4 screws securing the burner in place. Then slide the burner off the the ori

fi

 ce and remove 

from the appliance. 

E.

 

To reinstall the burner reverse these steps. 

NOTE: When reinstalling the burner ensure that the 

venturi rests on the orifi ce.

D

10.4.2 

GLASS BURNER REMOVAL (HD4STG AND HD4PG ONLY)

Содержание HD4N




















































Отзывы:

Нет отзывов