manualshive.com logo in svg

Napoleon HD4N, Инструкция по установке и эксплуатации, Страница: 37 / 51

Поделиться
Скачать
Napoleon HD4N Скачать руководство пользователя страница 37

W415-1146 / A / 02.16.13

 37

EN

6.5  GLASS MEDIA INSTALLATION

74.2B

Evenly spread the glass media onto the media tray, ensuring no glass media falls into the pilot opening. If this 
happens, insert a clean bag into your vacuum cleaner and vacuum out the glass media. Replacement glass 
can be purchased from your local authorized dealer / distributor.

CLEANING GLASS MEDIA

Glass media may have a 

fi

 ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild

dish soap, drain, rinse thoroughly and dry before placing around the burner.

CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE 

THAT IT IS DRY.

DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF 

REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED 

DEALER / DISTRIBUTOR.

DO NOT PLACE ANY MEDIA (GLASS OR VERMICULITE) ON THE PILOT MESH. THIS WILL INTERFERE WITH 

THE PILOT OPERATION

!

WARNING

6.6  OPTIONAL ROCK PLACEMENT (HD4STC AND HD4C ONLY)

Place the refractory driftwood rocks onto the media 
tray, around, but not on the burner ports or pilot mesh. 

NOTE: Glass media may cover the entire media tray. Care should be taken around the pilot mesh.
We recommend that no media should be placed directly on the pilot mesh.

(HD4STG AND HD4PG ONLY)

(HD4STC AND HD4C ONLY)

PILOT MESH

MEDIA TRAY

PILOT MESH

MEDIA TRAY

Содержание HD4N




















































Отзывы:

Нет отзывов