Napoleon BGD40-N, Инструкция по установке и эксплуатации

Страница: 23 / 36

23
W415-0299 / C / 03.12.03
PHAZER
TM
logs, glowing and charcoal embers, exclusive
to Napoleon fireplaces, provide a unique and realistic glow-
ing effect that is different in every installation. Take the time
to carefully position the embers for a maximum glowing
effect.
Figures 46 A - H.
1 . Looking at the unit from the valve side, place log #1
diagonally across the textured burner cover onto the pins.
The texture is designed to cradle the underside of the log.
2. Depending on the type of installation, the view of the log
positioning will reverse. Here the lower end of log #2 rests
near the
back left corner of the firebox on the locating pin.
The upper end sits on top of log #1, inside the groove on
log #2.
3. Log # 3 is made up of
two pieces, a and b. Piece
#3a is the base of log #3.
The base sits diagonally in
the designated area lo-
cated between logs #1 and
fits tight up against #2.
4. The slot in the under-
side of piece #3b fits over
#3a. Place the end of
piece #3b onto the pin.
5. When pieces #3a and #3b are attached to create log
#3, the upper end of log #3 should rest in the groove, on
top of log # 2.
6. As with log # 1, log #4 is also cradled by the texture of the
burner cover and the pin in the base. Position log #4 so that
the lower end fits onto the pin. The upper end rests against
the moulded locater on the top of log # 1.
7. Like log #3, log #5
also comes in two
pieces. The base
(#5a) slopes
outwards between
logs #2 and #4.
As with pieces #3a
& b, piece #5b fits
over piece #5a.
Place the end of
piece #5b onto the
pin.
8. The upper end of log #5 rests in the groove, on top of
log #4 and creates the final appearance of log set.
a
D
b
#3
#3
E
#5
a
b
G
A
LOCATING PINS
#1
LOCATING PINS
#2 B
C
#3a
F
#4
#1
#2
#3
#4
#5
H
LOG PLACEMENT