8.7 CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTION
8.8 KEY LOCK
8.9 LOW BATTERY
A.
Use the Mode Key to guide you to the CPI mode icon.
Transmitter in the OFF position.
B.
Press the UP/DOWN to switch between IPI and CPI
modes. A single BEEP will confi rm reception of the
command.
NOTE: If the system is equipped with a CPI/IPI toggle
switch, set the CPI/IPI to CPI position to enable remote CPI
operation. If the switch is set to IPI then it will only work in
IPI regardless of what is set on the remote control handset.
35.22
76
°F
IPI
76
°F
CPI
This function will lock the keys to avoid unsupervised operation.
A.
Press the MODE and UP keys at the same time.
B.
To de-activate this function, press the MODE and UP keys at the same
time.
35.10A
76
°F
The life span of the remote batteries depends on various factors: quality of the batteries,
the number of ignitions, the number of charges to the room thermostat set point, etc.
When the transmitter batteries are low, a Battery Icon will appear on the LCD display
before all battery power is lost. When the batteries are replaced this icon will disappear.
35.24
76
°F
W415-2207 / A / 08.28.17
35
EN
