2.5
hearth log & log placement
PHAZER
TM
logs and glowing embers are exclusive to Napoleon. They provide a realistic glowing effect that is unique
in every installation. Take time to carefully position the glowing embers for a maximum glowing effect. Log colours
may vary. As a result of the heat-activated curing process, the colours will become more uniform during the appli-
ance's initial use as pigments burn in.
note:
All logs are stamped with a part number.
A
B
C
D
E
F
A.
Align the hole in the bottom of the rear
left log (marked #1) with the stud on the
left of the burner. Ensure no ports are
covered.
B.
Align the hole in the bottom of the rear
right log (marked #2) with the stud on the
right of the burner. Ensure no ports are
covered.
C.
Place the front left log (marked #3) over
the front left part of the burner so that
the notch is around the center grate
post. Ensure no ports are covered.
D.
Place the front right log (marked #4) over
the front right part of the burner so that
the notch is around the center grate post.
Ensure no ports are covered.
E.
Align the slots in the bottom left rear log
(W135-0566) with the left and center
tabs of the rear log support.
F.
Place the bottom right rear log (W135-
0567) onto the right tab of the rear log
support.
EN
W415-2745 / A / 11.04.19
5
installation
